+3 dB additional | elastic membrane | additional layer between gypsum fiberboards and gypsum plasterboards | 1.2 m²

Cvisco™ - Sound and vibration isolating membrane that adds +3 dB to the system Viscoelastic heavy polyvinyl membrane. Used for damping between the mute board and the finished plasterboard layer. Thickness: 2.5 mm Quantity: 1.2 m² (roll material, 1 m wide).  

28,99 €

incl. VAT

Description

Help I hear my neighbor. What can I do?
SilentFiber SOUND PROTECTION PLATE

Mode of action

The main acoustic principle used in the system is mass + spring + mass as in the electromechanical analogy. Developed wrude developed an extra thin and 4 times more effective system, which uses 5 specially designed Anti-vibration DClox™ fasteners is mounted.

  • Due to the different densities of the materials used (foam, gypsum fiber, rubber).
  • The approx. 5 mm air gap effectively prevents the sound waves from causing the wall to vibrate and thus generate airborne sound again
  • Less than 1% contact area with the static wall - low vibration transmission into the static wall.
  • Fixing points with the static wall are also strongly damped by the special elastomers

DClox™ is a patented fastening element specially designed for the installation of SilentFiber MUTE SYSTEM sound insulation panels was developed.

The innovative fasteners are made of special elastomers and are thus an effective vibration damping point connection between the existing partition wall and the panel. Their geometry reduces the sound transmission rate and minimizes the contact area between the sound insulation panels and the existing wall to below 1%.

YouTube

By loading the video, you accept YouTube's privacy policy.
Learn more

Load video

Step by step installation instructions of the sound insulation panel

Your contact to us

Do you have questions about our products or do you need more detailed information and tips on how to achieve the most effective sound insulation of your wall, whether to the neighbor or outside? Then do not hesitate to contact us! We will surely find an individual solution how you can spend a quieter everyday life in the future. You can reach us by phone at (D) 004985726369994 or (A) 00436509110614, by mail to info@silentfiber.net or conveniently via our Contact form. We are looking forward to your message!

Frequently asked questions

No, this will not achieve the desired effect. A distinction is made between ACOUSTIC PANELS and SOUND PROTECTION PANELS. Acoustic panels "only" reduce the echo within a room and thus contribute to better room acoustics. To effectively reduce noise from neighbors or the street, you need a different product.

For real and effective sound insulation, you need to install our hemp soundproofing panels on the wall facing the neighbor or the street.

Depending on the structure and substrate, an improvement of 5-10 dB can be achieved.

That doesn't sound like much of an effect to you? In absolute terms, this value is roughly equivalent to the ticking of a clock or the rustling of leaves. But: an improvement of 10 dB is a halving of the perceived loudness and thus an increase in the quality of life through more quiet. You hear your neighbor only half as loud - that already sounds much better, doesn't it?

With the plasterboard depends on the weight. They should be as heavy as possible. In DIY stores, you can usually find special soundproofing gypsum boards that are recommended. For example, you can use Knauf Silentboard or Knauf Diamond for SilentFiber sound insulation boards to improve sound insulation to the neighbor.

It is important that the layer on the soundproofing board is heavy - that is, has a high density. On the one hand, you can use heavy plasterboard, on the other hand, OSB board. On top of the OSB board you can then glue wood facing or other materials visible in the room.